UFI 30 886 00 flat type air filter, paper filament in rubber surround

NB Packaging may vary. See SIA28367 for the equivalent reusable K & N filter

 5 in stock

 28113660 GU28113660 28 11 36 60
 2811 3660 2811.3660 28.11.36.60

A2 stainless socket cap screw M10 x 55mm, many applications including lower yoke fork clamp bolts on Tonti models

Also known as Guzzi ref. 98620555

 5 in stock

98072555-z 98072555 GU98072555 98 07 25 55
 9807 2555 9807.2555 98.07.25.55

40mm fork seal. Two fork types are used on recent small twins, we recommend checking your old fork seal before opening

Also known as Guzzi ref. 90404052, 904040953, 90404051, 90404054

 5 in stock

90403952-z 90403952 GU90403952 90 40 39 52
 9040 3952 9040.3952 90.40.39.52

14 sided oil filter tool for Mahle filter SIA15301. Also fits the latest 14 sided version of the oil filter fitted to late CARC models.

This tool is for models where the sump needs to be removed to get to the oil filter. Not suitable for Champion or UFI oil filters

 5 in stock

Bearing used as UJ carrier bearing on pre 2007 models (see TRA90062 for retaining circlip). Used as outer crownwheel carrier bearing on CARC units

 5 in stock

 92204230 GU92204230 92 20 42 30
 9220 4230 9220.4230 92.20.42.30

Threaded straight throttle cable adjuster for carb top with M6 thread

 5 in stock

 12937200 GU12937200 12 93 72 00
 1293 7200 1293.7200 12.93.72.00

Stainless steel M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. This is the same length as the genuine Brembo part BRA17659. M10 bleed screw used only on rear of 2003 on models

Part of Guzzi ref. 17659260. Some brake calipers may require a longer bleed screw, we reecommend measuring your existing screw - it should be 15mm from under the flats to the base of the tip.

 5 in stock

"The Carburettor Manual" is a comprehensive guide from Dellorto to the setting up and use of tapered needle motorcycle carburettors. Covers principle of operation of all Dellorto tapered needle carburettors 1970 onwards. 33 pages with colour pictures and diagrams. Also included is the original Dellorto "Tuning Guide 1.1" for carburettors, which gives advice on the choice, setting and use of a Dellorto tapered needle carburettor which includes colour carburettor cross sections showing the multiple stages of carburettor operation. Also contains float height and tapered needle selection tables.

 5 in stock

Replacement green LED in chrome bezel for Gutsibits clock surrounds ACA01001 and ACA01002

These 12v LEDs include a resistor, wires should be soldered to the mini spade connectors on the base of the LED

 5 in stock

As we all know, an oil change on your Guzzi can be a messy business, this valve and pipe kit allows you to direct all the used oil into a container for disposal.
Imagine a tool free oil change!
This system works by using a quick release locking valve which will only allow oil to pass through when the drain pipe valve is attached. A cap covers the valve in normal use. Replaces the existing sump drain plug
Consists of:

• Valve body, CNC precision turned part made of high quality steel
• Copper crush washer
• Hose connector, CNC precision turned part made of high quality steel
• High quality hose 40cm long
• Protection cover made of aluminum, anodized
• Illustrated Manual

One time installation, so it will not wear the weak thread in your sump pan. Not suitable for NTX and TT models fitted with sump bashguards

 5 in stock